Heledirn accessories: supports
Heledirn classes all aids that are designed to hold one or more different pieces of equipment as supports.
Supports are connected to special openings at the ends of the frame. Supports can simply be pushed into the frame or fixed in place using a wing nut. They can also be attached to banksticks. Supports can be used to hold up bait boxes or trays, or to attach extra top sets or rods. Support pegs can be attached to one of four openings on the Kingfisher's outer edge. They can be fixed into place or used as pivots.
banksticks
Heledirn has its own range of rests. The starting point here is that the rests must be rigidly attached to the fishing station. When you are sitting still, your rod must also be still. Of course, Heledirn takes account of what you have already purchased. You can attach all your existing rests to the Heledirn rests, provided they are standard sizes.
The rests can be used to attach rod rests, spray bars, trays and all accessories that can be connected to 25mm tubes.
umbrella supports
.jpg&width=173&height=173)
Support to connect your umbrella to the Kingfisher This umbrella support is connected to the bottom of the Kingfisher. It is not necessary to stick the umbrella into the ground. Your embrulla can be supported on whatever ground.
This umbrella support exists of 3 parts:
A support bar, a bankstick with an opening of 19mm and a support element.
keepnet posts
The keepnet post is a short bank stick that can be screwed onto the keepnet. You just allow it to rest against the keepnet. When you start fishing you simply throw it out and slide the keepnet post into the quick release tube you require, then clamp it firmly in. If you want to move the keepnet or temporarily lift it up (in order to move the catch, for example), you unclick the clamp and simply lift it up. It is replaced just as easily.
trays
Heledirn now provides trays that can be connected to the Kingfisher. They can be attached to the left or right at different heights. In short, wherever you want.
The trays can be used to hold bait buckets, bait boxes or groundbait boxes so that everything is close to hand.
Yet another clever Heledirn product.